For Drying & Roasting 60 to 600 deg.

PNEUMATIC DRYERS

FINEX Pneumatic Dryer incorporate the advantage of long time practical experience and careful construction. Multifarious potential application. The complicated process of warming up, conditioning and removal of moisture is economically and easily realized.
The special designed, Dozzing system ensure fluidizing and uniform feeding of the wet product into the positive pressure pipeline and anti cyclones and finally the Dried powder is discharges into a Curved Entry Cyclone. This cyclone Design ensures 99.5% efficiency of total Dried Powder discharge and very fine particles with moisture to a Dust collector with continuous Bag shaking arrangement.
This is a non vibrating continuous Fluid Bed Drier for increased operating efficiency. Cuts clearing time and is very cost effective power consumed viz a viz dry powder output. Multiple Air inlets and outlets we Eliminated as there is only one outlet product inlet and one dry product outlet.
The Drier is specially designed for heat sensitive Low Temperature of Low Bulk Density Products. The System is fabricated in Stainless Steel /GI and Carbon Steel to handle Drying Capacities from 50 Kgs to 500 Kgs/hr.

FLASH DRYERS FOR HIGH TEMPERATURE DRYING UPTO 600 DEG

This is a Pneumatic high pressure conveying system in which from one side hot air and wet cake material with moisture is fed ,the wet cake travels in the vertical horizontal path in a hot air stream where evaporation takes place .These are custom designed systems for moisture removal at high temperatures from 200 to 600 degre flashing takes place. Systems are fabricated in mild steel and stainless steel construction to handle capacities ranging from 100kgs/hr to 1000kgs /hr.

ROASTERS FOR HIGH TEMP HEATING OF SPICES, COFFEE, RICE

Spices, cereals, grams, coffee beans, chicory etc are roasted in this Equipment, In the double walled solid roasting cylinder rotating at 30 rpm material is fed and run in a batch operation from 15 minutes to 1 hour, There is damper arrangement for hot air flow from internal or external heating, The Roaster is for roasting batches of 1000kgs to 20 tons using 3hp to 50 hp. Equipment is fabricated from mild steel or stainless steel. Cooling systems are also offered separately.